TSHOOT – Plano de EstudosTSHOOT – Study Plan

Olá Pessoal,

Estou aqui, mais uma vez, colocando outro plano de estudos. Desta vez, busco realizar a prova TSHOOT! Esta prova + a BSCI (plano de estudos) + BCMSN (plano de estudos) me tornarão certificado CCNP.

Agora, estou bastante próximo da realidade de muitos. Para os que não sabem, no dia 31/janeiro/2010 me graduei em Eng. da Computação, e ao longo deste período foi complicado trabalhar devido a carga intensa de faculdade, e por isso pude me dedicar bastante para a certificação. Agora, estou trabalhando nos 5 dias da semana e vou ter que adequar meu horário para estudar de 1 – 5 horas por dia (sempre).

Uma dica que sempre passo para todos que entram em contato ou falam comigo é nunca fique um dia sem estudar. O estudar aqui não cabe apenas a fazer um laboratório no computador ou ler um livro. Eu me refiro ao estudo no sentido mais amplo, englobando a mentalização do conteúdo aprendido, sua revisão (também mental) e a visualização do que foi estudado em pleno funcionamento no mundo real.

Com base no conteúdo da prova TSHOOT e da maneira que é abordado no livro oficial de estudo é que criei a divisão por tópicos de estudo. O material teórico que utilizarei como base para meu estudo é:

  1. 642-832 TSHOOT – Official Certification Guide, por Kevin Wallace.
  2. 642-832 TSHOOT – Quick Reference Guide, por Brent Stewart.

Para a parte prática utilizarei o GNS3/Dynamips.

Então, vamos ao plano de estudos.

1. Ler o Livro TSHOOT Official Certification Guide

2. Agrupar os tópicos de estudo para ir estudando, entendendo e praticando da seguinte maneira (poderá ser reformulado conforme nível de exigência):

a. Troubleshoot Routing Protocols

(i). EIGRP

(ii). OSPF

(iii). BGP

b. Troubleshoot Switching Technologies

(i). VLAN

(ii). STP

(iii). SVI (e switching related)

c. Troubleshoot Switch & Router Security e outros pequenos aspectos

d. Troubleshoot IPv6

e. Maintainence of Networks (ITIL)

3. Abordar cada macro tópico de maneira top-down da seguinte maneira:

a. Reler a parte identificando pontos críticos (gerar anotações e resumos quando possível (TXT))

b. Realizar atividade prática nos temas que achar relevante (principalmente nos críticos)

c. Responder as questões do livro e se possível de outras fontes (buscar mais fontes)

4. Identificar pontos críticos de todo o conteúdo e repetir o passo 3 até ficar bem claro.

5. Ler o Quick Reference Guide para fixação.

6. Rever todo o conteúdo mentalmente apoiando-se como base o Official Cert. Guide, Quick Reference Guide e Anotações até o dia da prova.

Por fim, fica uma foto do meu pequeno HomeLab que estou montando aos poucos (com direito à Easter Eggs).

Bentow - Cisco HomeLab - Switch 2950, Router DSL 827, Linksys WRT54G

Um grande abraço,

Bentow.

TSHOOT – Primeiras impressõesTSHOOT – The first impressions

Troubleshooting!

Olá Pessoal,

Hoje estou fazendo 22 anos e para comemorar, estou retomando com tudo, agora com uma cópia do livro CCNP TSHOOT 642-832 Official Certification Guide, por Kevin Wallace. Desde que foi lançada a prova TSHOOT e anunciado o novo tracking da certificação CCNP este livro constava nos catálogos de algumas lojas virtuais, porém não era possível efetuar a sua compra. Agora, finalmente consegui uma cópia.

Além disso, ao analisar o site CareerCert passado numa dica do Minu do Forum CCNA, consegui obter o TSHOOT Quick Reference Guide. Por meio desse site foi possível atualizar o HD do blog com livros e materiais para o estudo da certificação CCNP, neste novo tracking (ROUTE, SWITCH e TSHOOT). Este material está disponível no HD do blog, pasta Livros.

Mas o mais importante disso tudo, é que ao ler e analisar o Quick Reference Guide foi possível verificar que a prova TSHOOT veio ensinar muitas coisas nas quais se aprende na prática, tanto da parte técnica quanto conceitual. Ela aborda um pouco dos conteúdos vistos em frameworks de TI (como o ITIL), aborda muitos novos comandos que auxiliam na parte de Troubleshooting e obtenção da informação relevante (grepping), além das diversas metodologias para se fazer o Troubleshooting numa rede (top-down, bottom-up, etc.).

Pela primeira impressão que tive desta prova, será necessário usar a abusar de topologias de redes complexas para poder entender os problemas e solucioná-los de uma maneira sistemática. E fico muito feliz que assim torna o profissional mais qualificado, quase que eliminando a chance da pessoa focar no Braindump para atingir a certificação.

Meu próximo passo é criar o plano de estudos para concluir o primeiro semestre certificado CCNP. Let’s go!!!

Um grande abraço,

Maurício Bento Ghem.

[Hd do Blog] Curso de Inglês, CCDA e ITIL

Olá Pessoal,

O HD do Blog ganhou novas atualizações!!!

http://bentow.4shared.com

A melhor delas é um curso de INGLês que inclui as lições em MP3 para você fazer uma breve leitura no livro texto e acompanhar via áudio!

Além disso, foram incluídos os Video Mentor para a certificações CCDA e ITIL. Também, foram incluídos os materiais de estudo para a certificações CCDA, meu objetivo após o CCNP.

Um grande abraço,

Maurício.

Como praticar para BCMSN? Pequena solução

Olá Pessoal,

Este post é dedicado a todos que, como eu, estão estudando para a prova BCMSN e tem um grande problema em mãos. Como praticar para esta prova (sem gastar com equipamentos)?

Encontrei uma solução que mesmo não sendo o estudando (nós) que digitamos os comandos, os resultados produzidos por eles são bem explicados.

Começarei desde o início… Antes de começar a estudar para o CCNP, baixei todo material que encontrei para todas as provas. Agora, ao revisar este material, encontrei o livro:

CCNP BCMSN - Portable Command Guide, por Scott Empson

CCNP BCMSN – Portable Command Guide, por Scott Empson

Este livro apresenta um passo-a-passo comentado de todas configurações realizadas para os mais diversos cenários. É uma solução que não elimina a necessidade de praticar e fazer o troubleshooting, mas aproxima aluno do ambiente prático. Através deste livro, descobri que o Dynamips suporta o VTP (VLAN Trunking Protocol) através do modo deprecated Vlan Database.

Na minha opinião, a única carência neste livro é a falta do resultado dos comandos show e debug. Mas, aliando o Dynamips com este guia, o seu nível prático de estudo para a certificação será melhorado consideravelmente.

Abaixo, apresento uma topologia contida no livro na qual sua configuração é detalhada por completo.

Topologia do Livro BCMSN Command Line Guide.

Este livro eu encontrei pela primeira vez no HD do blog do Marco Filippetti, mas disponibilizei no HD do Blog como um mirror, na pasta Livros.

Um grande abraço pessoal,

Maurício.

Recomendaçao de Livro para crescimento interiorBook recommendation for interior growing

Olá Pessoal,

Como se trata de meu último ano de faculdade estou bastante atarefado. Mas, como tudo em nossa vida, devemos por prioridade e nos organizar para atingir nossas metas e conciliar tudo.

Hoje, retomei o estudo para BCMSN seguindo a metodologia de estudos publicada anteriormente, sendo que nesta fase estou lendo o livro oficial da Cisco Press.

Este post tem um objetivo maior de guiar todos que buscam o crescimento interior e a transcendência para um outro nível de entendimento da vida. É dedicado à todos que buscam o verdadeiro amadurecimento.

Relacionado a isto, gostaria de indicar um livro, que por mais que o título pareça sensacionalista, o conteúdo é de extremo valor. O nome do livro é “Os 7 hábitos das pessoas altamente eficazes”, por Dr. Stephen Covey.

Os 7 habitos das pessoas altamente eficazes - Stephen Covey

Em OS 7 HÁBITOS DAS PESSOAS ALTAMENTE EFICAZES estão contidos os princípios fundamentais da eficácia humana – sete hábitos básicos e primordiais que representam a interiorização dos princípios corretos, nos quais estão baseados o sucesso e a felicidade duradoura.

Leiam e reflitam sobre a sua vida e sua missão aqui para entender a razão de sua existência.

Um grande abraço,

Maurício.

Hello Guys,

As this is my last year of college I am very busy. But as everything in our life, we organize by priority and to achieve our goals and reconcile all.

Today, it takes up the study for BCMSN following the methodology of studies published previously, which at this stage I’m reading the book’s official Cisco Press.

This post has a greater purpose to guide all who seek the inner growth and transcendence to another level of understanding of life. It is dedicated to all who seek the true maturity.

Related to this, I would give a book which by title seems more than the sensational, the content is of extreme value. The name of the book is “The 7 habits of highly effective people” by Dr. Stephen Covey.

Os 7 habitos das pessoas altamente eficazes - Stephen Covey

In the 7 HABITS OF HIGHLY EFFECTIVE PEOPLE are contained the fundamental principles of human effectiveness – seven basic habits and key representing the internalization of correct principles, which are based on the success and lasting happiness.

Read and reflect on his life and mission here to understand the reason for their existence.

A big hug,

Maurício.

Primeira fase de estudos para a BCMSN completaFirst phase of studying for BCMSN exam complete

To-do

Olá Pessoal,

Ontem a noite concluí a primeira fase de meu estudo: assitir a todos CBT Nuggets referente ao exame BCMSN acompanhando pelo livro da CiscoPress de maneira superficial.

O próximo passo, referente no post da minha metodologia de estudos como passo 5, é praticar o que conseguir no Dynamips. Como o Dynamips é um emulador de Roteadores Cisco, terei que acoplar o módulo NM-16ESW que agrega funções de switching ao router.

Após praticar algumas topologias, comandos e outros artifícios, farei a leitura completa do livro oficial de estudos da Cisco Press: 642-812 BCMSN 4th Edition, por David Hucaby.

Um grande abraço,

Maurício Bento GhemTo-doHello Guys,

Last night completed the first phase of my study: to assist all CBT Nuggets concerning BCMSN exam following the book’s CiscoPress so superficial.

The next step, referring to my post in the methodology of studies and step 5, is the practice to get in Dynamips. As Dynamips is an emulator of Cisco routers, have to attach the module NM-16ESW that adds functions for switching the router.

After practicing some topologies, controls and other artifacts, will complete the reading of the book studies the official Cisco Press: 642-812 BCMSN 4th Edition, by David Hucaby.

A big hug,

Maurício Bento Ghem

Blog disponível também em InglêsBlog also available in English

Olá Pessoal,

Ao longo da semana, pensando em expandir os horizontes do blog, descobri uma ferramenta para realizar a tradução semi-automática do blog para o inglês.
Eu pensava nesta iniciativa a um bom tempo, mas nunca tive tempo para concretizá-la devido a minha dedicação Full-time para os estudos.

Agora, o blog terá o título em inglês 😀

Cisco CCNA || Study Guide

Um grande abraço,
Maurício.Hello Guys,

Throughout the week, looking to expand the horizons of the blog, I discovered a tool to achieve semi-automatic translation of the blog into English.
I thought this initiative a good time, but never had time to implement it due to my dedication to the Full-time studies.

Now, the blog also has an English title.

Cisco CCNA || Study Guide

A big hug,
Maurício.

Metodologia de estudos para BCMSNMethodology of studies for BCMSN

Olá Pessoal,

Durante esta tarde, formulei minha metodologia de estudos que utilizarei para me preparar para a prova BCMSN (Building Converged Cisco Multilayer Switched Networks), 642-812. Esta será a segunda prova necessária para a obtenção da certificação CCNP, sendo que a primeira que fiz foi a BSCI. As próximas provas que farei serão, respectivamente, ISCW e ONT.

Materiais utilizados:

Segue abaixo a metodologia.

  1. Estruturar por áreas de conhecimento o conteúdo da prova. Uma separação boa é a utilizada no livro do David Hucaby.
  2. Olhar o vídeo do CBT Nuggets referente a área a ser aprendida.
  3. Ler de maneira superficial o capítulo para verificar os temas assistidos no vídeo.
  4. Repetir os passos 2 e 3 até completar todo o conteúdo.
  5. Tentar praticar alguns conceitos relevantes no Dynamips.
  6. Ler todo o livro de maneira detalhada.
  7. Fazer laboratórios dos temas importantes.
  8. Realizar simulados para obter feedback do conhecimento.
  9. Baseado no feedback praticar ou estudar mais. Materiais externos devem ser priorizados por credibilidade.
  10. Repetir passo 9, e esporadicamente o 8 até obter a segurança no estudo.

Dica Extra 1: Após a leitura detalhada do livro, e início da prática, toda dúvida que surgir deverá ser sanada.

Dica Extra 2: Para a BSCI eu fiz um TXT que continha todas minhas dúvidas, elas respondidas e outras informações que eu sentia que precisavam ser fixadas. Façam isso! É uma ótima maneira de fixar alguma coisa, visto que a quantidade de conteúdo é imensa.

Seguindo esta metodologia pretendo otimizar meu tempo e aprendizado. Este método é baseado nas experiências anteriores que tive com as outras provas.

Um grande abraço pessoal e sucesso a todos.

Maurício Bento Ghem.Hello Guys,

During the afternoon, put my methodology of studies that use to prepare me for the proof BCMSN (Building Converged Cisco Multilayer Switched Networks), 642-812. This will be the second test required to obtain the CCNP certification, and the first that I was the BSCI. The next evidence will be, respectively, ISCW and ONT.

Materials used:

Below the methodology.

  1. Structuring areas of knowledge for the content of the test. A good separation is used in the book of David Hucaby.
  2. Watch the video of the CBT Nuggets for area to be learned.
  3. Read the chapter on a surface to check the subjects attended in the video.
  4. Repeat steps 2 and 3 to complete the entire content.
  5. Try to practice some concepts relevant to Dynamips.
  6. Read the entire book in detail.
  7. Do laboratories of important topics.
  8. Perform simulations to obtain feedback of knowledge.
  9. Based on feedback practice or study more. Materials should be prioritized by external credibility.
  10. Repeat step 9 and 8 until the time the security in the study.

Extra Tip 1: After a detailed reading of the book, and start of practice, all questions that arise should be settled.

Extra Tip 2: For the BSCI I did a TXT which contained all my questions, they answered and other information that I felt needed to be fixed. Do it! It is a great way to fix something, because the amount of content is huge.

Following this approach want to optimize my time and learning. This method is based on previous experience I had with the other evidence.

A big hug and personal success for all.

Maurício Bento Ghem.

Passei na BSCI – Resultado e PreparaçãoPassed the BSCI exam – Result and Preparation

Olá pessoal,

No post anterior eu informei que havia passado na BSCI e me prontifiquei a detalhar um pouco mais da jornada que eu tive até a obtenção desta certificação.

Primeiro, meu resultado na BSCI foi:

Nota: 911 / 1000

Corte: 790

Questões: 61

Tempo: 2 horas.

ScoreCard:

  • Implement EIGRP operations: 88%
  • Implement multiarea OSPF operations: 80%
  • Describe Integrated IS-IS: 85%
  • Implement Cisco IOS routing features: 100%
  • Implement BGP for enterprise ISP connectivity: 90%
  • Implement multicast forwarding: 100%
  • Implement IPv6: 62%

Confirmo o que muitos dizem, a BSCI é difícil! Garanto a todos que se a minha preparação não fosse tão boa, não passaria na prova. Diferentemente da CCNA, a BSCI tem muito mais questões que faz você pensar. Na minha prova caiu todo o conteúdo estudado. Não lembro de nada que não caiu.

Os laboratórios que caíram em minha prova foram os seguintes:

  • Troubleshooting de uma configuração de Virtual-Link em OSPFv3;
  • Redistribution bidirecional de IS-IS e EIGRP;
  • Outro que não me recordo…

As questões foram das mais diversas, por isso ressalto a todos:

Estudem e Aprendam, pois se não fizerem isto (e tentar a sorte por braindumps) poderão não ser ótimos profissionais e não passarão na certificação, pois esta prova, especialmente,  é Hardcore!

Cada segundo da minha jornada de estudos valeu a pena, pois tudo me agregou conhecimento. Agora, falarei um pouco de como foi minha preparação.

Para a BSCI, não tinha feito nenhum plano de estudos – coisa que farei para a BCMSN para otimizar o tempo – mas  meu estudo foi de 24/03/2009 (um dia depois da aprovação do CCNA) até 30/05/2009 (2 dias antes de ser aprovado na BSCI) e seguiu da seguinte maneira:

  1. Assisti a todos os vídeos do CBT Nuggets, por Jeremy Cioara (disponível no HD do Blog).
  2. Fiz um overview do livro oficial da CiscoPress, por Brent Stewart (disponível no HD do Blog).
  3. Comecei a tentar praticar alguns laboratórios, mas vi que faltava alguma coisa.
  4. Li detalhadamente todo o livro do Brent Stewart, ao longo da leitura fui praticando laboratórios para cada um dos capítulos que passava.
  5. Após a conclusão do livro, iniciei minha longa jornada em laboratórios. Fiz laboratórios de tudo que caía na BSCI, muitas vezes misturando 2 ou 3 áreas de conhecimento para observar a convergência dos protocolos em  conjunto.
  6. Comecei a resolver questões de simulados para identificar meus pontos fracos.
  7. Identificado estes pontos fracos, reli o capítulo do livro, pratiquei com laboratórios deste tema e quando estava bastante seguro quanto ao conteúdo fiz um simuladão de toda esta área de conhecimento.
  8. Fiquei alternando entre os passos 6,7,8 até 1 semana antes do dia da prova.
  9. Nesta última semana relaxei, pois estava com a sensação que poderia ter feito uma semana antes. Mas, revisei o que não estava 100% seguro (Multicast) e 2 dias antes da prova encontrei um texto chamado BSCI QuickSheat que foi bastante interessante para ver todo o conteúdo da prova como um overview geral.
  10. Um dia antes da prova, relaxei e não vi nada do conteúdo nem de anotações.

Dicas Extras: Sempre mantenha um TXT de anotações! Quando você tiver uma dúvida coloque-a neste TXT. Quando você tiver uma informação que é nova para você anote-a no TXT. Desta maneira, você terá um arquivo compilado de informações e poderá acompanhar todo seu progresso, e se na evolução de seu estudo você tiver uma dúvida que diz respeito ao que você já estudou, você terá anotado no TXT.

Pessoal, por hora é isto. Espero poder ter contribuído bastante, e agora rumo a BCMSN. Nesta semana elaborarei um plano de estudos e estarei publicando no blog para você acompanharem.

Um forte abraço e sucesso a todos nós.

Maurício Bento GhemHello everybody,

In previous post I was informed that in the past BSCI and prontifiquei me to detail a little more of the day I had to get this certification.

First, the BSCI was my result:

Note: 911 / 1000

Trim: 790

Questions: 61

Time: 2 hours.

Scorecard:

  • Implement EIGRP operations: 88%
  • Implement multiarea OSPF operations: 80%
  • Describe Integrated IS-IS: 85%
  • Implement Cisco IOS routing features: 100%
  • Implement BGP for enterprise ISP connectivity: 90%
  • Implement multicast forwarding: 100%
  • Implement IPv6: 62%

Confirm what many say, the BSCI is difficult! Ensures that all my preparation was not so good, would not in evidence. Unlike the CCNA, the BSCI has more questions that makes you think. In my test fell all content studied. Do not remember anything that did not fall.

The laboratories that fell in my test were:

  • Troubleshooting a configuration of Virtual Link in OSPFv3;
  • Bidirectional redistribution of IS-IS and EIGRP;
  • Other than I remember …

The issues were the most diverse, so the rebound all:

Study and learn, because if you do not this (and try your luck for braindumps) may not be optimal and not pass the professional certification, as this evidence, especially, is Hardcore!

Each second of my journey of study paid off, because all I added knowledge. Now, talk a little as my preparation.

For the BSCI, I had not done any study plan – something that will do for BCMSN to optimize the time – but my study was to 24/03/2009 (the day after the approval of CCNA) until 30/05/2009 (2 days before being approved in BSCI) and followed by:

  1. I watched all the videos from CBT Nuggets by Jeremy Cioara (available in HD Blog).
  2. I made an overview of the book’s official CiscoPress by Brent Stewart (available in HD Blog).
  3. I started trying to practice some laboratories, but saw that something was missing.
  4. Li detail throughout the book of Brent Stewart, during the reading was practicing laboratories for each of the chapters that happening.
  5. After completion of the book, began my long journey in laboratories. Laboratories of all that I fell in BSCI, often mixing 2 or 3 areas of expertise to observe the convergence of protocols together.
  6. Began to address issues of simulated to identify my weaknesses.
  7. Identified these weaknesses, reread the chapter of the book, practicing with laboratories and when this issue was fairly safe as the content did a simuladão of this whole field.
  8. I was alternating between steps 6,7,8 until 1 week before the day of examination.
  9. Relax this last week, as was the feeling I could have done a week earlier. But that was not reviewed the 100% secure (Multicast) and 2 days before the test found a text named BSCI QuickSheat that was quite interesting to see the entire contents of the evidence as a general overview.
  10. One day before the test, relax and not seen anything of the content or annotations.

Extra Tips: Always keep a TXT annotations! When you have a question put it in TXT. When you have an information that is new to you write it in TXT. Thus, you have compiled a file of information and can track all your progress, and if the development of your study you have a question that relates to what you studied, you have noted in TXT.

Personnel, per hour is this. I hope to have contributed a lot, and now towards BCMSN. This week will draw up a plan of studies and will publish on the blog for you to follow.

A strong hug and success to all of us.

Maurício Bento Ghem

Livros + Video Mentor + Simulados para CCNPBooks + Video + Mentor Simulator for CCNP

Olá Pessoal,

Gostaria de lhes comunicar que hoje foi atualizado o HD do blog.

Foram inseridos todos os livros CiscoPress oficiais para estudo para cada uma das provas dos CCNP. Além disso, foram incluídos simulados como (TKs e P4S) que recomendo sua utilização apenas para identificar os pontos fracos no seu estudo.

Outra ferramenta interessante para o estudo que foi incluído são os Vídeo Mentors! Todos são narrado pelo autor Jeremy Cioara. Para todos que são bons no entendimento do inglês é uma ferramenta perfeita para fixar o conteúdo lido nos livros.

Segue o link para o HD do blog:
http://bentow.4shared.com

Um abração,
Maurício.

Hello Guys,

I would like to inform you that today was the HD updated the blog.

Were inserted all books CiscoPress official to study for each of the CCNP tests. Moreover, were included as simulated (TKS and P4S) to recommend its use only to identify the weaknesses in their study.

Another interesting tool for the study that was included is the video Mentors! All are narrated by the author Jeremy Cioara. For all that is good understanding of English is a perfect tool for setting the contents read in books.

Follow the link for the HD blog:
http://bentow.4shared.com

A Abrasive,
Maurício.

Próxima Etapa CCNP – Início: BSCI.CCNP next step – Beginning: BSCI.

Olá Pessoal,

Este ano estou me formando, então o tempo passa muito rápido. Tenho que definir meus objetivos da noite pro dia (foi o que aconteceu).

Decidi que até o final do ano me certificarei como CCNP, então já estou correndo atrás.

A primeira parte do estudo será a leitura do livro: CCNP BSCI – Official Exam Cert. Guide por David Steward 4a edição

Após, seguirei os mesmos passos para o CCNA. Agora, como se trata de assuntos mais complexos utilizarei o CBT Nuggets muito mais.

Abaixo uma figura do meu set leitura + Dynamips no note.

Livro BSCI do Stewart + Ferramenta GNS3-Dynamips.

Abraço pessoal,

Sucesso!

Maurício.Hello Guys,

This year I’m training, so the time passes very fast. I have to set my goals of the night pro day (it happened).

I decided that until the end of the year CCNP certified as me, then I’m already running behind.

The first part of the study will be reading the book CCNP BSCI – Official Exam Cert. Guide 4th edition by David Steward

After that, follow the same steps for the CCNA. Now, as this is the most complex use the CBT Nuggets more.

Below a picture of my set in note reading + Dynamips.

Livro BSCI do Stewart + Ferramenta GNS3-Dynamips.

Embrace personal,

Success!

Maurício.

Cheatsheets e Resumos – por Packet LifeCheatsheets and Abstracts – by Packet Life

Olá Pessoal,

O pessoal do forum blog.ccna.com.br/forum postou um link que contêm diversos resumos de ótima qualidade, chamados de cheatsheets, escrito pelo pessoal do site Packet Life que inclui diversos tópicos que são escopo da CCNA. Abaixo, estão apresentados os links diretos para cada uma dessas cheatsheets.

Access-Lists, EIGRP, IPv6, OSPF, Spanning-Tree, Subnetting, VLAN, 802.11 Wireless

Link para o pacotão

Imagem da página com os resumos:

Página com os resumos da Packet Life

Abração,

Maurício.Hello Guys,

The staff of the forum blog.ccna.com.br / forum posted a link containing several summaries of excellent quality, calledcheatsheets, written by the staff of the site Life Packet which includes several topics that are scope of CCNA. Below, shows the direct links for each of these cheatsheets.

Access-Lists, EIGRP, IPv6, OSPF, spanning-tree, Subnetting, VLAN, Wireless 802.11

Link to the package

Image of the page with summaries:

Página com os resumos da Packet Life

Abrasive,

Maurício.

Resumo de Comandos Show no RoteadorSummary of the Router Show Commands

Olá Pessoal,

Com base no laboratório de Frame-Relay publicado anteriormente neste Post e após todo o estudo da topologia rodei os comandos abaixo, coloquei suas saídas e fiz uma tabela com uma descrição completa do que cada comando apresenta. Há um link no comando que leva diretamente para seu output.

Espero que seja de bom uso esta tabela, pois eu a utilizarei.

Um abração pessoal.

Maurício.

COMANDO RELACIONADO A RESULTADO
Show interface <interface> Hardware Apresenta status do link, endereço IP, clock rate, MTU, e protocolos da camada física e de enlace rodando (ex: LCP, NCP no PPP).
Show ip interface <interface> Configuração Apresenta dados como: status da conexão física e lógica, endereço IP, MTU, ACLs, NAT e diversos outros parâmetros.
show ip interface brief Configuração Resumo da interface: endereço IP, status do link físico e lógico,
show protocols Configuração Apresenta status do link e endereço IP, deste.
show ip protocols Protocolos de Roteamento Apresenta todas informações relevantes aos protocolos de roteamento em uso: parâmetros de configuração, rotas anunciadas, última atualização.
show ip route Tabela de Roteamento Apresenta a tabela de roteamento. Mostra a rede na qual foi aprendido (dinâmica ou estaticamente), [distância administrativa/métrica] e o IP e a interface na qual foi aprendida esta rota
show ip eigrp interfaces <AS> EIGRP Apresenta as interfaces na qual o EIGRP está rodando. Pode-se não anunciar rotas em determinadas interfaces através do comando passive-interfaces.
show ip eigrp neighbors EIGRP Apresenta os vizinhos rodando EIGRP e dados como: IP do vizinho, interface, Holdtime, Uptime, SRTT (Smooth Round Trip Time), RTO (Retransmission Time Out), Q Cnt (Queue), Seq Num.
show ip eigrp topology EIGRP Apresenta a topologia da rede. Indica: estado da rota (passive/active), (feasible distance/advertised distance).
show ip eigrp traffic EIGRP Apresenta estatísticas de pacotes EIGRP.
show frame-relay lmi Frame-Relay Apresenta estatísticas a respeito do LMI (Link Management Interface), o padrão de sinalização, entre o dispositivo local e o switch frame-relay.
show frame-relay map Frame-Relay Apresenta o mapeamento IP -> DLCI (Data Link Connection Identifier), normalmente criado através do comando frame map, ou através da tradução dinâmica pelo Inverse ARP.
show frame-relay pvc Frame-Relay Apresenta estatísticas em cada circuito frame-relay e outros dados tais como: interfaces e respectivos DLCI, tráfego, bits DE (Discard Eligibility), FECN (Forward-Explicit Congestion Notification), BECN (Backward-Explicit Congestion Notification).
show cdp CDP Apresenta informações relevantes aos timers: de envio de atualizações, holdtime e a versão anunciada do cdp.
show cdp neighbors CDP Apresenta informações referente aos vizinhos tais como: Device ID (Hostname), Local Intrf (Interface que este router está recebendo os pacotes cdp), HoldTime, Capability (Router / Switch…), Plataform (Modelo), Port ID (Porta remota).
show cdp neighbors detail CDP Apresenta as mesmas informações que o anterior, incluindo: IP do outro host e detalhes de IOS.
Show cdp entry * CDP Mesmo comando que o anterior, mudando que pode-se selecionar apenas um dispositivo pelo seu ID.

OUTPUTS:

R_Caxias#show interfaces
FastEthernet0/0 is up, line protocol is up (connected)
Hardware is Lance, address is 0001.4211.2e01 (bia 0001.4211.2e01)
Internet address is 192.168.30.1/24
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00,
Last input 00:00:08, output 00:00:05, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 124 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 input packets with dribble condition detected
789 packets output, 56808 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out

R_Caxias#show ip interface
FastEthernet0/0 is up, line protocol is up (connected)
Internet address is 192.168.30.1/24
Broadcast address is 255.255.255.255
Address determined by setup command
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is disabled
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is enabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is disabled
IP fast switching on the same interface is disabled
IP Flow switching is disabled
IP Fast switching turbo vector
IP multicast fast switching is disabled
IP multicast distributed fast switching is disabled
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Probe proxy name replies are disabled
Policy routing is disabled
Network address translation is disabled
WCCP Redirect outbound is disabled
WCCP Redirect exclude is disabled
BGP Policy Mapping is disabled

R_Caxias#show ip interface brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 192.168.30.1 YES manual up up
FastEthernet0/1 unassigned YES manual administratively down down
Serial0/0 unassigned YES manual up up
Serial0/0.201 172.16.2.2 YES manual up up
Serial0/1 unassigned YES manual administratively down down

R_Caxias#show protocols
Global values:
Internet Protocol routing is enabled
FastEthernet0/0 is up, line protocol is up
Internet address is 192.168.30.1/24
FastEthernet0/1 is administratively down, line protocol is down
Serial0/0 is up, line protocol is up
Serial0/0.201 is up, line protocol is up
Internet address is 172.16.2.2/30
Serial0/1 is administratively down, line protocol is down

R_Caxias#show ip protocols
Routing Protocol is "eigrp 10 "
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
EIGRP maximum hopcount 100
EIGRP maximum metric variance 1
Redistributing: eigrp 10
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
192.168.30.0
172.16.0.0
Routing Information Sources:
Gateway Distance Last Update
172.16.2.1 90 10
Distance: internal 90 external 170


R_Caxias#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Gateway of last resort is 172.16.2.1 to network 0.0.0.0

172.16.0.0/30 is subnetted, 3 subnets
D 172.16.1.0 [90/46738176] via 172.16.2.1, 00:29:06, Serial0/0.201
C 172.16.2.0 is directly connected, Serial0/0.201
D 172.16.3.0 [90/46738176] via 172.16.2.1, 00:29:06, Serial0/0.201
D 192.168.20.0/24 [90/46740736] via 172.16.2.1, 00:29:06, Serial0/0.201
C 192.168.30.0/24 is directly connected, FastEthernet0/0
D 192.168.40.0/24 [90/46740736] via 172.16.2.1, 00:29:06, Serial0/0.201
D*EX 0.0.0.0/0 [170/46738176] via 172.16.2.1, 00:29:06, Serial0/0.201


R_Caxias#show ip eigrp interfaces
IP-EIGRP interfaces for process 10

Xmit Queue Mean Pacing Time Multicast Pending
Interface Peers Un/Reliable SRTT Un/Reliable Flow Timer Routes
Fa0/0 0 0/0 1236 0/10 0 0
Ser 1 0/0 1236 0/10 0 0
R_Caxias#show ip eigrp interfaces ?
<1-65535> AS Number


R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11

R_Caxias#show ip eigrp topology
IP-EIGRP Topology Table for AS 10

Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - Reply status

P 192.168.30.0/24, 1 successors, FD is 28160
via Connected, FastEthernet0/0
P 172.16.2.0/30, 1 successors, FD is 46226176
via Connected, Serial0/0.201
P 172.16.1.0/30, 1 successors, FD is 46738176
via 172.16.2.1 (46738176/46226176), Serial0/0.201
P 172.16.3.0/30, 1 successors, FD is 46738176
via 172.16.2.1 (46738176/46226176), Serial0/0.201
P 0.0.0.0/0, 1 successors, FD is 46738176
via 172.16.2.1 (46738176/2169856), Serial0/0.201
P 192.168.20.0/24, 1 successors, FD is 46740736
via 172.16.2.1 (46740736/46228736), Serial0/0.201
P 192.168.40.0/24, 1 successors, FD is 46740736
via 172.16.2.1 (46740736/46228736), Serial0/0.201


R_Caxias#show ip eigrp traffic
IP-EIGRP Traffic Statistics for process 10
Hellos sent/received: 882/873
Updates sent/received: 6/4
Queries sent/received: 0/0
Replies sent/received: 0/0
Acks sent/received: 1/4
Input queue high water mark 1, 0 drops
SIA-Queries sent/received: 0/0
SIA-Replies sent/received: 0/0


R_Caxias#show frame-relay lmi
LMI Statistics for interface Serial0/0 (Frame Relay DTE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 549 Num Status msgs Rcvd 549
Num Update Status Rcvd 0 Num Status Timeouts 16

LMI Statistics for interface Serial0/0.201 (Frame Relay DTE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 0 Num Status msgs Rcvd 0
Num Update Status Rcvd 0 Num Status Timeouts 16


R_Matriz#show frame-relay map
Serial0/0.100 (up): point-to-point dlci, dlci 100, broadcast, status defined, active
Serial0/0.200 (up): point-to-point dlci, dlci 200, broadcast, status defined, active
Serial0/0.300 (up): point-to-point dlci, dlci 300, broadcast, status defined, active

R_Matriz#show frame-relay pvc
PVC Statistics for interface Serial0/0 (Frame Relay DTE)
DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.100

input pkts 14055 output pkts 32795 in bytes 1096228
out bytes 6216155 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 32795 out bcast bytes 6216155

DLCI = 200, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.200

input pkts 14055 output pkts 32795 in bytes 1096228
out bytes 6216155 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 32795 out bcast bytes 6216155

DLCI = 300, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.300

input pkts 14055 output pkts 32795 in bytes 1096228
out bytes 6216155 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 32795 out bcast bytes 6216155

R_Matriz#show frame-relay pvc ?
<16-1022> DLCI
interface show frame relay information on one interface

R_Matriz#show cdp
Global CDP information:
Sending CDP packets every 60 seconds
Sending a holdtime value of 180 seconds
Sending CDPv2 advertisements is enabled
R_Matriz#show cdp ?
entry Information for specific neighbor entry
interface CDP interface status and configuration
neighbors CDP neighbor entries

R_Matriz#show cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone
Device ID Local Intrfce Holdtme Capability Platform Port ID
R_Embratel Ser 0/1 180 R C2600 Ser 0/0

R_Matriz#show cdp neighbors detail || show cdp entry *
Device ID: R_Embratel
Entry address(es):
IP address : 201.0.0.1
Platform: cisco C2600, Capabilities: Router
Interface: Serial0/1, Port ID (outgoing port): Serial0/0
Holdtime: 180

Version :
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.2(28), RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 27-Apr-04 19:01 by miwang

advertisement version: 2
Duplex: full

Referências:

– Filippeti, M. – “CCNA 4.1 – Guia Completo de Estudo”, Visual Books/2008.

– Cisco NetAcademy, Academy Connection. “Material oficial Cisco de Estudo”. <http://cisco.netacad.net>. Acesso em: 27/02/2008.Hello Guys,

Based on the laboratory of Frame-Relay published earlier in this post and after all the study of topology tergiversation the commands below, put their exits and made a table with a full description of what each line offers. There is a link that leads directly in charge for their output.

I hope that is good use of this table, because I use.

A Abrasive staff.

Maurício.

COMMAND A RELATED RESULT
Show interface <interface> Hardware Displays the link status, IP address, clock rate, MTU, and protocols of physical layer and link running (eg LCP, NCP in PPP).
Show ip interface <interface> Configuration Presents data such as status of physical and logical connection, IP address, MTU, ACLs, NAT and various other parameters.
show ip interface brief Configuration Summary of interface: IP address, status of physical and logical link,
show protocols Configuration Displays the link status and IP address of this.
show ip protocols Routing Protocols Presents all relevant information to routing protocols in use: configuration parameters, routes announced, last update.
show ip route Routing Table Displays the routing table. Shows the network in what was learned (dynamic or static) [administrative distance / metric] and IP and the interface on which this route was learned
show ip EIGRP interfaces <AS> EIGRP Displays the interfaces in which EIGRP is running. You can not advertise routes on certain interfaces through the passive-interface command.
show ip EIGRP neighbors EIGRP Displays EIGRP neighbors running and data as the neighbor’s IP, interface, Holdtime, Uptime, SRTT (Smooth Round Trip Time), RTO (Retransmission Time Out), Q Cnt (Queue), Seq Num.
show ip EIGRP topology EIGRP Displays the network topology. States: state of the route (passive /active), (feasible distance / advertised distance).
show ip EIGRP traffic EIGRP Displays statistics for EIGRP packets.
show frame-relay LMI Frame-Relay Displays statistics on the LMI (Link Management Interface), the pattern of signaling between the local device and the frame-relayswitch.
show frame-relay map Frame-Relay Displays the IP mapping -> DLCI (Data Link Connection Identifier), usually created by using the frame map, or through dynamic translation by Inverse ARP.
show frame-relay pvc Frame-Relay Displays statistics for each frame-relay circuit and other data such as interfaces and DLCI, traffic, DE bit (Discard Eligibility), FECN (Forward-Explicit Congestion Notification), BECN (Backward-Explicit Congestion Notification).
show CDP CDP Presents relevant information to timers: the sending of updates, and holdtime of CDP version announced.
show CDP neighbors CDP Presents information regarding neighbors such as: Device ID (Hostname), Local Intrf (Interface that the router is receiving packets CDP), HoldTime, Capability (Router / Switch …), platform (Model), Port ID (remote port).
show CDP neighbors detail CDP Presents the same information as the previous one, including: IP host and the other details of IOS.
Show CDP entry * CDP Same command as before, changing that you can select only one device by its ID.

OUTPUTS:

R_Caxias#show interfaces
FastEthernet0/0 is up, line protocol is up (connected)
Hardware is Lance, address is 0001.4211.2e01 (bia 0001.4211.2e01)
Internet address is 192.168.30.1/24
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00,
Last input 00:00:08, output 00:00:05, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 124 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 input packets with dribble condition detected
789 packets output, 56808 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out

R_Caxias#show ip interface
FastEthernet0/0 is up, line protocol is up (connected)
Internet address is 192.168.30.1/24
Broadcast address is 255.255.255.255
Address determined by setup command
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is disabled
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is enabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is disabled
IP fast switching on the same interface is disabled
IP Flow switching is disabled
IP Fast switching turbo vector
IP multicast fast switching is disabled
IP multicast distributed fast switching is disabled
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Probe proxy name replies are disabled
Policy routing is disabled
Network address translation is disabled
WCCP Redirect outbound is disabled
WCCP Redirect exclude is disabled
BGP Policy Mapping is disabled
255255255255 R_Caxias#show ip interface
FastEthernet0/0 is up, line protocol is up (connected)
Internet address is 192.168.30.1/24
Broadcast address is 255.255.255.255
Address determined by setup command
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is disabled
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is enabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is disabled
IP fast switching on the same interface is disabled
IP Flow switching is disabled
IP Fast switching turbo vector
IP multicast fast switching is disabled
IP multicast distributed fast switching is disabled
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Probe proxy name replies are disabled
Policy routing is disabled
Network address translation is disabled
WCCP Redirect outbound is disabled
WCCP Redirect exclude is disabled
BGP Policy Mapping is disabled

R_Caxias#show ip interface brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 192.168.30.1 YES manual up up
FastEthernet0/1 unassigned YES manual administratively down down
Serial0/0 unassigned YES manual up up
Serial0/0.201 172.16.2.2 YES manual up up
Serial0/1 unassigned YES manual administratively down down
192.168.30.1 R_Caxias#show ip interface brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 192.168.30.1 YES manual up up
FastEthernet0/1 unassigned YES manual administratively down down
Serial0/0 unassigned YES manual up up
Serial0/0.201 172.16.2.2 YES manual up up
Serial0/1 unassigned YES manual administratively down down

R_Caxias#show protocols
Global values:
Internet Protocol routing is enabled
FastEthernet0/0 is up, line protocol is up
Internet address is 192.168.30.1/24
FastEthernet0/1 is administratively down, line protocol is down
Serial0/0 is up, line protocol is up
Serial0/0.201 is up, line protocol is up
Internet address is 172.16.2.2/30
Serial0/1 is administratively down, line protocol is down

R_Caxias#show ip protocols
Routing Protocol is "eigrp 10 "
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
EIGRP maximum hopcount 100
EIGRP maximum metric variance 1
Redistributing: eigrp 10
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
192.168.30.0
172.16.0.0
Routing Information Sources:
Gateway Distance Last Update
172.16.2.1 90 10
Distance: internal 90 external 170


R_Caxias#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Gateway of last resort is 172.16.2.1 to network 0.0.0.0

172.16.0.0/30 is subnetted, 3 subnets
D 172.16.1.0 [90/46738176] via 172.16.2.1, 00:29:06, Serial0/0.201
C 172.16.2.0 is directly connected, Serial0/0.201
D 172.16.3.0 [90/46738176] via 172.16.2.1, 00:29:06, Serial0/0.201
D 192.168.20.0/24 [90/46740736] via 172.16.2.1, 00:29:06, Serial0/0.201
C 192.168.30.0/24 is directly connected, FastEthernet0/0
D 192.168.40.0/24 [90/46740736] via 172.16.2.1, 00:29:06, Serial0/0.201
D*EX 0.0.0.0/0 [170/46738176] via 172.16.2.1, 00:29:06, Serial0/0.201


R_Caxias#show ip eigrp interfaces
IP-EIGRP interfaces for process 10

Xmit Queue Mean Pacing Time Multicast Pending
Interface Peers Un/Reliable SRTT Un/Reliable Flow Timer Routes
Fa0/0 0 0/0 1236 0/10 0 0
Ser 1 0/0 1236 0/10 0 0
R_Caxias#show ip eigrp interfaces ?
<1-65535> AS Number


R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11
172.16.3.2 R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11
01:01:00 R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11
172.16.1.2 R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11
01:01:00 R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11
172.16.2.2 R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11
01:01:00 R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11

R_Caxias#show ip eigrp topology
IP-EIGRP Topology Table for AS 10

Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - Reply status

P 192.168.30.0/24, 1 successors, FD is 28160
via Connected, FastEthernet0/0
P 172.16.2.0/30, 1 successors, FD is 46226176
via Connected, Serial0/0.201
P 172.16.1.0/30, 1 successors, FD is 46738176
via 172.16.2.1 (46738176/46226176), Serial0/0.201
P 172.16.3.0/30, 1 successors, FD is 46738176
via 172.16.2.1 (46738176/46226176), Serial0/0.201
P 0.0.0.0/0, 1 successors, FD is 46738176
via 172.16.2.1 (46738176/2169856), Serial0/0.201
P 192.168.20.0/24, 1 successors, FD is 46740736
via 172.16.2.1 (46740736/46228736), Serial0/0.201
P 192.168.40.0/24, 1 successors, FD is 46740736
via 172.16.2.1 (46740736/46228736), Serial0/0.201


R_Caxias#show ip eigrp traffic
IP-EIGRP Traffic Statistics for process 10
Hellos sent/received: 882/873
Updates sent/received: 6/4
Queries sent/received: 0/0
Replies sent/received: 0/0
Acks sent/received: 1/4
Input queue high water mark 1, 0 drops
SIA-Queries sent/received: 0/0
SIA-Replies sent/received: 0/0


R_Caxias#show frame-relay lmi
LMI Statistics for interface Serial0/0 (Frame Relay DTE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 549 Num Status msgs Rcvd 549
Num Update Status Rcvd 0 Num Status Timeouts 16

LMI Statistics for interface Serial0/0.201 (Frame Relay DTE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 0 Num Status msgs Rcvd 0
Num Update Status Rcvd 0 Num Status Timeouts 16


R_Matriz#show frame-relay map
Serial0/0.100 (up): point-to-point dlci, dlci 100, broadcast, status defined, active
Serial0/0.200 (up): point-to-point dlci, dlci 200, broadcast, status defined, active
Serial0/0.300 (up): point-to-point dlci, dlci 300, broadcast, status defined, active

R_Matriz#show frame-relay pvc
PVC Statistics for interface Serial0/0 (Frame Relay DTE)
DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.100

input pkts 14055 output pkts 32795 in bytes 1096228
out bytes 6216155 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 32795 out bcast bytes 6216155

DLCI = 200, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.200

input pkts 14055 output pkts 32795 in bytes 1096228
out bytes 6216155 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 32795 out bcast bytes 6216155

DLCI = 300, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.300

input pkts 14055 output pkts 32795 in bytes 1096228
out bytes 6216155 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 32795 out bcast bytes 6216155

R_Matriz#show frame-relay pvc ?
<16-1022> DLCI
interface show frame relay information on one interface

R_Matriz#show cdp
Global CDP information:
Sending CDP packets every 60 seconds
Sending a holdtime value of 180 seconds
Sending CDPv2 advertisements is enabled
R_Matriz#show cdp ?
entry Information for specific neighbor entry
interface CDP interface status and configuration
neighbors CDP neighbor entries

R_Matriz#show cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone
Device ID Local Intrfce Holdtme Capability Platform Port ID
R_Embratel Ser 0/1 180 R C2600 Ser 0/0

R_Matriz#show cdp neighbors detail || show cdp entry *
Device ID: R_Embratel
Entry address(es):
IP address : 201.0.0.1
Platform: cisco C2600, Capabilities: Router
Interface: Serial0/1, Port ID (outgoing port): Serial0/0
Holdtime: 180

Version :
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IM), Version 12.2(28), RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 27-Apr-04 19:01 by miwang

advertisement version: 2
Duplex: full

References:

– Filippeti, M. – “CCNA 4.1 – Complete Study Guide, Visual Books/2008.

– Cisco NetAcademy, Academy Connection. “Cisco Study Material official.” <http://cisco.netacad.net>. Acesso em: 27/02/2008.

VLSM – Referência de estudo

Olá Pessoal,

Hoje, descobri um ótimo website para treinar o raciocínio rápido à respeito das VLSMs (Variable-lenght subnet masks). Ele apresenta diversas questões sobre endereçamento IP e máscaravas variadas, você pensa a resposta e clica para mostrar a resolução.

Vale a pena conferir.

Segue o link:

http://www.subnettingquestions.com/

Abração e ótimo carnaval!

Maurício.

Livro CCNA 4.1

Olá pessoal,
Hoje chegou o meu livro CCNA 4.1 do Marco Filippetti, mantenedor do blog blog.ccna.com.br, outra referência para todos nós que queremos nos tornar Cisco Associates.

Este livro é uma das melhores referências em português existentes para a nova versão da prova. Estou levando o meu para praia, para ler nas horas vagas depois do churrasco. heheheeh

Abraços,

Maurício.

Bem-vindo ao Cisco CCNA || Guia de Estudo

Olá Pessoal,

Sejam bem-vindos ao novo website que em breve será reconhecido como referência para estudos da nova prova CCNA (640-802).

O objetivo do autor é de compartilhar todo o material de estudo utilizado para se preparar para a prova, apresentar um roteiro de estudos e estar apto a responder todas e quaisquer dúvidas.

O autor possui experiência de 2 anos no mundo de redes de computadores atuando na área de networking com Linux, mas não fugindo as configurações de equipamentos Cisco/Linksys.

Um abraço pessoal,
Maurício.