Próxima Etapa CCNP – Início: BSCI.CCNP next step – Beginning: BSCI.

Olá Pessoal,

Este ano estou me formando, então o tempo passa muito rápido. Tenho que definir meus objetivos da noite pro dia (foi o que aconteceu).

Decidi que até o final do ano me certificarei como CCNP, então já estou correndo atrás.

A primeira parte do estudo será a leitura do livro: CCNP BSCI – Official Exam Cert. Guide por David Steward 4a edição

Após, seguirei os mesmos passos para o CCNA. Agora, como se trata de assuntos mais complexos utilizarei o CBT Nuggets muito mais.

Abaixo uma figura do meu set leitura + Dynamips no note.

Livro BSCI do Stewart + Ferramenta GNS3-Dynamips.

Abraço pessoal,

Sucesso!

Maurício.Hello Guys,

This year I’m training, so the time passes very fast. I have to set my goals of the night pro day (it happened).

I decided that until the end of the year CCNP certified as me, then I’m already running behind.

The first part of the study will be reading the book CCNP BSCI – Official Exam Cert. Guide 4th edition by David Steward

After that, follow the same steps for the CCNA. Now, as this is the most complex use the CBT Nuggets more.

Below a picture of my set in note reading + Dynamips.

Livro BSCI do Stewart + Ferramenta GNS3-Dynamips.

Embrace personal,

Success!

Maurício.

PROVA MARCADAEXAM SCHEDULED

Olá pessoal,

Minha prova está marcada para Segunda-feira (23/03/2009) às 9:00 da manhã.

Acredito estar preparado, faltando revisar alguns conceitos e fazer mais questões para trenar o nervosismo e a dinâmica da prova.

Aos que acompanham o blog, me desejem sorte e muito estudo.

Após a conclusão, quero detalhar no blog todos os pontos que passei pela prova, e detalhar ainda mais o meu método de estudo utilizado para a obtenção da Certificação.

Um forte abraço,

Maurício.Hello staff,

My test is scheduled for Monday (23/03/2009) at 9:00 in the morning.

I stand ready, missing concepts and to review some more questions for the nervousness and dynamic chain of evidence.

To the accompanying blog, wish me luck and much study.

After completion, I blog in detail all the points that had the evidence, and further detail my method of study used to obtain the certification.

Sincerely,

Maurício.

Guia e Roteiro de EstudosCCNA Study guide

Olá Pessoal,

Como podem ter visto, parei de atualizar um pouco o blog, devido ao fato de que estou estudando um montão para me certificar até o início de abril!

Para todos que desejam saber a maneira na qual estou me organizando para o estudo segue abaixo.

  1. Ler o livro CCNA 4.1 do Marco Filippeti.
  2. Fazer laboratórios de roteamento (ACL, NAT, Protocolos de roteamento, aprendizagem de rotas…).
  3. Fazer laboratório de switching (VLAN, VTP, administração, Etherchannel, STP…).
  4. Reler para entendimento o livro do Marco e NetAcademy, as partes de Switching e configuração de switches.
  5. Fazer todo TestKing da parte de Switching.
  6. Fazer um Pass4Sure para identificar pontos fracos.
  7. Voltar ao passo 4, lendo o que se identificou como ponto fraco, e seguir a seqüência até identificar que estou preparado.
  8. Marcar a prova para no máximo 3 dias adiante.

Este é o meu roteiro de estudos pessoal.

Se tiverem algum comentário para dar uma complementada, ou uma outra sugestão, agradeço muito o envolvimento.

Abração,

Maurício.Hello Guys,

As can be seen, stopped updating the blog a bit, due to the fact that I am studying a lot to satisfy me until the beginning of April!

For all who wish to know the way in which I am organizing for the study below.

  1. Read the book of Marco Filippeti CCNA 4.1.
  2. Do laboratories routing (ACL, NAT, routing protocols, routes of learning …).
  3. Do laboratory switching (VLAN, VTP, administration, Etherchannel, STP …).
  4. Read for understanding the book of Mark and NetAcademy, parts of Switching and setting switches.
  5. Do all TestKing from Switching.
  6. Add a Pass4Sure for weaknesses.
  7. Back to step 4 by reading what is identified as weak, and follow the sequence to identify that I am prepared.
  8. Mark the event for maximum 3 days later.

This is my personal roadmap studies.

If you have any comments to one supplemented, or another suggestion, thank you very much involvement.

Abrasive,

Maurício.

Cheatsheets e Resumos – por Packet LifeCheatsheets and Abstracts – by Packet Life

Olá Pessoal,

O pessoal do forum blog.ccna.com.br/forum postou um link que contêm diversos resumos de ótima qualidade, chamados de cheatsheets, escrito pelo pessoal do site Packet Life que inclui diversos tópicos que são escopo da CCNA. Abaixo, estão apresentados os links diretos para cada uma dessas cheatsheets.

Access-Lists, EIGRP, IPv6, OSPF, Spanning-Tree, Subnetting, VLAN, 802.11 Wireless

Link para o pacotão

Imagem da página com os resumos:

Página com os resumos da Packet Life

Abração,

Maurício.Hello Guys,

The staff of the forum blog.ccna.com.br / forum posted a link containing several summaries of excellent quality, calledcheatsheets, written by the staff of the site Life Packet which includes several topics that are scope of CCNA. Below, shows the direct links for each of these cheatsheets.

Access-Lists, EIGRP, IPv6, OSPF, spanning-tree, Subnetting, VLAN, Wireless 802.11

Link to the package

Image of the page with summaries:

Página com os resumos da Packet Life

Abrasive,

Maurício.

Não passou na CCNA? Tenha uma segunda chance de graçaDid not pass the CCNA? Get a second chance for free

Olá Pessoal,

Este post é para informar a todos, e isso foi confirmado pelo Marco deste blog que o seguinte desconto está valendo até 20 de julho de 2009:

“Você deve fazer a prova para uma certificação, não passar e poderá agendar até esta data, refazê-la e não pagar nada.”

Para isso, deve utilizar o Promotion Code: COMEBACK2009, ao agendar sua prova no site da Vue (abaixo).

COMEBACK2009 - Promotion Code para fazer a CCNA pela segunda vez de graça.

Abaixo, segue a mensagem do site da VUE ao tentar cadastrar uma prova. Notem a data da validade da promoção.

Mensagem da VUE indicando validade até 20/jul/2009 para COMEBACK2009

Um abração,

Sucesso – by Maurício.Hello Guys,

This post is to inform everyone, and this was confirmed by Marco this blog the following discount is valid until July 20, 2009:

“You must do the test for certification, and could not pass schedule to date, redo it and not pay anything.”

This should use the Promotion Code: COMEBACK2009 to schedule your test on the website of the Vue (below).

COMEBACK2009 - Promotion Code para fazer a CCNA pela segunda vez de graça.

Below, the following message VUE’s website when trying to register a trial. Please note the date of the validity of the promotion.

Mensagem da VUE indicando validade até 20/jul/2009 para COMEBACK2009

A Abrasive,

Success – by Mauricio.

Resumo de Comandos Show: Roteamento OSPF, NAT e ACLSummary of Show Commands: OSPF Routing, NAT and ACL

Olá Pessoal,

Baseado neste laboratório de Frame-relay, dou continuidade à lista de comandos Show. Agora, tratando de: roteamento, OSPF, NAT e ACL.

Abaixo apresento uma imagem da topologia, e então os comandos Show, baseado na mesma.

Topologia do Laboratório Completo de Frame-Relay.
Topologia do Laboratório Completo de Frame-Relay.
COMANDO RELACIONADO A RESULTADO
Show ip route Tabela de Roteamento Apresenta a tabela de roteamento. Mostra a rede na qual foi aprendido (dinâmica ou estaticamente), [distância administrativa/métrica] e o IP e a interface na qual foi aprendida esta rota
Show ip protocols Protocolo de Roteamento Apresenta informações dos protocolos de roteamento em execução (resumo e status). São dadas informações como: detalhes específicos de cada protocolo (ex. Router ID para OSPF), redes que está anunciando e vizinhos (fontes) de roteamento.
Show ip ospf OSPF Apresenta as configurações estipuladas para o protocolo OSPF. Apresenta informações como: Router ID (o maior ID (IP) ou o ID definido na interface Loopback, se existir) e temporizadores.
show ip ospf data OSPF Apresenta, agora, os Link IDs, ou seja, o ID que cada link (interface) possui, o tempo no qual foi aprendido (age) e o Link ID (ID da interface do roteador) que está anunciando a rota.
Show ip ospf interface <interface> OSPF Apresenta todas informações OSPF relativo a cada interface. Informações como: endereço IP, área OSPF, Router ID, tipo de rede (ppp,point-to-multipoint), informações sobre DR/BDR(para links ppp o OSPF não elege DRs), timers e informações sobre vizinhos (adjacências).
Show ip ospf neighbor OSPF Apresenta um resumo e status da adjacência com os vizinhos. Este comando apresenta informações como: ID do router vizinho, estado (DR,BDR..), dead time (tempo até a rota se extinguir, ou receber um novo hello), endereço IP do vizinho e interface local do Router no qual se encontra este vizinho.
Show ip nat translations NAT Apresenta as traduções NAT feitas e informações como: protocolo, inside local e global e outside local e global.
Show ip Nat statistics NAT Apresenta estatísticas de tradução NAT.
Show ip Access-lists ACLs Apresenta todas as ACLs IP criadas e a quantidade de matches (quantas vezes ela foi aplicada).

Comandos:


R_NH#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Gateway of last resort is 172.16.1.1 to network 0.0.0.0

172.16.0.0/30 is subnetted, 3 subnets
C 172.16.1.0 is directly connected, Serial0/0.101
O 172.16.2.0 [110/3570] via 172.16.1.1, 00:01:05, Serial0/0.101
O 172.16.3.0 [110/3570] via 172.16.1.1, 00:01:05, Serial0/0.101
C 192.168.20.0/24 is directly connected, FastEthernet0/0
O 192.168.30.0/24 [110/3571] via 172.16.1.1, 00:01:05, Serial0/0.101
O 192.168.40.0/24 [110/3571] via 172.16.1.1, 00:01:05, Serial0/0.101
O*E2 0.0.0.0/0 [110/1] via 172.16.1.1, 00:01:05, Serial0/0.101

R_Matriz#show ip protocols
Routing Protocol is "ospf 20"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Router ID 201.0.0.2
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
Maximum path: 4
Routing for Networks:
172.16.1.0 0.0.0.3 area 0
172.16.2.0 0.0.0.3 area 0
172.16.3.0 0.0.0.3 area 0
Routing Information Sources:
Gateway Distance Last Update
172.16.1.2 110 00:16:43
172.16.2.2 110 00:16:43
172.16.3.2 110 00:16:43
Distance: (default is 110)

R_Matriz#show ip ospf
Routing Process "ospf 20" with ID 201.0.0.2
Supports only single TOS(TOS0) routes
Supports opaque LSA
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Minimum LSA interval 5 secs. Minimum LSA arrival 1 secs
Number of external LSA 1. Checksum Sum 0x00f80e
Number of opaque AS LSA 0. Checksum Sum 0x000000
Number of DCbitless external and opaque AS LSA 0
Number of DoNotAge external and opaque AS LSA 0
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
External flood list length 0
Area BACKBONE(0)
Number of interfaces in this area is 3
Area has no authentication
SPF algorithm executed 2 times
Area ranges are
Number of LSA 4. Checksum Sum 0x021d3a
Number of opaque link LSA 0. Checksum Sum 0x000000
Number of DCbitless LSA 0
Number of indication LSA 0
Number of DoNotAge LSA 0
Flood list length 0

R_Matriz#show ip ospf data
OSPF Router with ID (201.0.0.2) (Process ID 20)

Router Link States (Area 0)

Link ID ADV Router Age Seq# Checksum Link count
192.168.20.1 192.168.20.1 379 0x80000003 0x00d1a1 3
201.0.0.2 201.0.0.2 379 0x80000007 0x000857 6
192.168.40.1 192.168.40.1 379 0x80000003 0x0091a1 3
192.168.30.1 192.168.30.1 379 0x80000003 0x00b1a1 3

Type-5 AS External Link States
Link ID ADV Router Age Seq# Checksum Tag
0.0.0.0 201.0.0.2 389 0x80000001 0x00f80e 1

R_NH#show ip ospf interface
FastEthernet0/0 is up, line protocol is up
Internet address is 192.168.20.1/24, Area 0
Process ID 20, Router ID 192.168.20.1, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 192.168.20.1, Interface address 192.168.20.1
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:01
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 1
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
Serial0/0.101 is up, line protocol is up
Internet address is 172.16.1.2/30, Area 0
Process ID 20, Router ID 192.168.20.1, Network Type POINT-TO-POINT, Cost: 1785
Transmit Delay is 1 sec, State POINT-TO-POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:01
Index 2/2, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 1
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1 , Adjacent neighbor count is 1
Adjacent with neighbor 172.16.1.1
Suppress hello for 0 neighbor(s)

R_Matriz#show ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
192.168.20.1 1 FULL/- 00:00:37 172.16.1.2 Serial0/0.100
192.168.30.1 1 FULL/- 00:00:37 172.16.2.2 Serial0/0.200
192.168.40.1 1 FULL/- 00:00:37 172.16.3.2 Serial0/0.300

R_Matriz#show ip nat translations
Pro Inside global Inside local Outside local Outside global
icmp 201.0.0.2:3 192.168.40.3:3 200.213.1.2:3 200.213.1.2:3
tcp 201.0.0.2:1025 192.168.20.3:1025 200.213.1.1:23 200.213.1.1:23

R_Matriz#show ip nat statistics
Total translations: 1 (0 static, 1 dynamic, 1 extended)
Outside Interfaces: Serial0/1
Inside Interfaces: Serial0/0.100 , Serial0/0.200 , Serial0/0.300
Hits: 8 Misses: 4
Expired translations: 3
Dynamic mappings:

R_Matriz#show ip access-lists
Standard IP access list 1
permit 172.16.1.0 0.0.0.3
permit 172.16.2.0 0.0.0.3
permit 172.16.3.0 0.0.0.3
permit 192.168.20.0 0.0.0.255 (2 match(es))
permit 192.168.30.0 0.0.0.255
permit 192.168.40.0 0.0.0.255 (6 match(es))

Abração,

E sucesso a todos.

Referências:

– Filippeti, M. – “CCNA 4.1 – Guia Completo de Estudo”, Visual Books/2008.

– Cisco NetAcademy, Academy Connection. “Material oficial Cisco de Estudo”. <http://cisco.netacad.net>. Acesso em: 02/03/2008.Hello Guys,

Based on this laboratory for Frame-relay, I continue the list of commands Show. Now, trying to: routing, OSPF, NAT, and ACL.

Below shows a picture of the topology, and then show the commands based on it.

Topologia do Laboratório Completo de Frame-Relay.

Topology of the Laboratory of Full-Frame Relay.

COMMAND A RELATED RESULT
Show ip route Routing Table Displays the routing table. Shows the network in what was learned (dynamic or static) [administrative distance / metric] and IP and the interface on which this route was learned
Show ip protocols Routing Protocol Displays information from routing protocols running (summary and status). Information is given as specific details of each protocol (eg Router ID for OSPF), and advertising networks that are neighbors (source) routing.
Show ip ospf OSPF Displays the settings set to the OSPF protocol. Displays information such as: Router ID (the highest ID (IP) or the ID defined in the Loopback interface, if any) and timers.
show ip ospf data OSPF Displays now link the IDs, or the ID for each link (interface) has the time in which it was learned (age) and the link ID (ID of the interface of the router) that is advertising the route.
Show ip ospf interface <interface> OSPF Displays all information on each OSPF interface. Information such as IP address, OSPF area, Router ID, type of network (ppp, point-to-multipoint), information on DR / BDR (ppp links to the OSPF not elect DRs), timers and information about neighbors (vicinity).
Show ip ospf neighbor OSPF Presents a summary and status of the adjacency with its neighbors.This command displays information such as neighbor router ID, state (DR, BDR ..), dead time (time until the route goes out, or receives a newhello), IP address of the neighbor and the local router interface which is this neighbor.
Show ip nat translations NAT Displays NAT translations made and information such as protocol,inside global, outside local, and local and global.
Show ip Nat statistics NAT Displays statistics for NAT translation.
Show ip access-lists ACLs Displays IP ACLs all created and the number of matches (how many times it was applied).

Commands:


R_NH#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Gateway of last resort is 172.16.1.1 to network 0.0.0.0

172.16.0.0/30 is subnetted, 3 subnets
C 172.16.1.0 is directly connected, Serial0/0.101
O 172.16.2.0 [110/3570] via 172.16.1.1, 00:01:05, Serial0/0.101
O 172.16.3.0 [110/3570] via 172.16.1.1, 00:01:05, Serial0/0.101
C 192.168.20.0/24 is directly connected, FastEthernet0/0
O 192.168.30.0/24 [110/3571] via 172.16.1.1, 00:01:05, Serial0/0.101
O 192.168.40.0/24 [110/3571] via 172.16.1.1, 00:01:05, Serial0/0.101
O*E2 0.0.0.0/0 [110/1] via 172.16.1.1, 00:01:05, Serial0/0.101

R_Matriz#show ip protocols
Routing Protocol is “ospf 20?
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Router ID 201.0.0.2
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
Maximum path: 4
Routing for Networks:
172.16.1.0 0.0.0.3 area 0
172.16.2.0 0.0.0.3 area 0
172.16.3.0 0.0.0.3 area 0
Routing Information Sources:
Gateway Distance Last Update
172.16.1.2 110 00:16:43
172.16.2.2 110 00:16:43
172.16.3.2 110 00:16:43
Distance: (default is 110)
00:16:43 R_Matriz#show ip protocols
Routing Protocol is “ospf 20?
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Router ID 201.0.0.2
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
Maximum path: 4
Routing for Networks:
172.16.1.0 0.0.0.3 area 0
172.16.2.0 0.0.0.3 area 0
172.16.3.0 0.0.0.3 area 0
Routing Information Sources:
Gateway Distance Last Update
172.16.1.2 110 00:16:43
172.16.2.2 110 00:16:43
172.16.3.2 110 00:16:43
Distance: (default is 110)
00:16:43 R_Matriz#show ip protocols
Routing Protocol is “ospf 20?
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Router ID 201.0.0.2
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
Maximum path: 4
Routing for Networks:
172.16.1.0 0.0.0.3 area 0
172.16.2.0 0.0.0.3 area 0
172.16.3.0 0.0.0.3 area 0
Routing Information Sources:
Gateway Distance Last Update
172.16.1.2 110 00:16:43
172.16.2.2 110 00:16:43
172.16.3.2 110 00:16:43
Distance: (default is 110)
00:16:43 R_Matriz#show ip protocols
Routing Protocol is “ospf 20?
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Router ID 201.0.0.2
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
Maximum path: 4
Routing for Networks:
172.16.1.0 0.0.0.3 area 0
172.16.2.0 0.0.0.3 area 0
172.16.3.0 0.0.0.3 area 0
Routing Information Sources:
Gateway Distance Last Update
172.16.1.2 110 00:16:43
172.16.2.2 110 00:16:43
172.16.3.2 110 00:16:43
Distance: (default is 110)

R_Matriz#show ip ospf
Routing Process “ospf 20? with ID 201.0.0.2
Supports only single TOS(TOS0) routes
Supports opaque LSA
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Minimum LSA interval 5 secs. Minimum LSA arrival 1 secs
Number of external LSA 1. Checksum Sum 0×00f80e
Number of opaque AS LSA 0. Checksum Sum 0×000000
Number of DCbitless external and opaque AS LSA 0
Number of DoNotAge external and opaque AS LSA 0
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
External flood list length 0
Area BACKBONE(0)
Number of interfaces in this area is 3
Area has no authentication
SPF algorithm executed 2 times
Area ranges are
Number of LSA 4. Checksum Sum 0×021d3a
Number of opaque link LSA 0. Checksum Sum 0×000000
Number of DCbitless LSA 0
Number of indication LSA 0
Number of DoNotAge LSA 0
Flood list length 0

R_Matriz#show ip ospf data
OSPF Router with ID (201.0.0.2) (Process ID 20)

Router Link States (Area 0)

Link ID ADV Router Age Seq# Checksum Link count
192.168.20.1 192.168.20.1 379 0x80000003 0x00d1a1 3
201.0.0.2 201.0.0.2 379 0x80000007 0x000857 6
192.168.40.1 192.168.40.1 379 0x80000003 0x0091a1 3
192.168.30.1 192.168.30.1 379 0x80000003 0x00b1a1 3

Type-5 AS External Link States
Link ID ADV Router Age Seq# Checksum Tag
0.0.0.0 201.0.0.2 389 0x80000001 0x00f80e 1

R_NH#show ip ospf interface
FastEthernet0/0 is up, line protocol is up
Internet address is 192.168.20.1/24, Area 0
Process ID 20, Router ID 192.168.20.1, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 192.168.20.1, Interface address 192.168.20.1
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:01
Index 1/1, flood queue length 0
Next 0×0(0)/0×0(0)
Last flood scan length is 1, maximum is 1
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
Serial0/0.101 is up, line protocol is up
Internet address is 172.16.1.2/30, Area 0
Process ID 20, Router ID 192.168.20.1, Network Type POINT-TO-POINT, Cost: 1785
Transmit Delay is 1 sec, State POINT-TO-POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:01
Index 2/2, flood queue length 0
Next 0×0(0)/0×0(0)
Last flood scan length is 1, maximum is 1
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1 , Adjacent neighbor count is 1
Adjacent with neighbor 172.16.1.1
Suppress hello for 0 neighbor(s)

R_Matriz#show ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
192.168.20.1 1 FULL/- 00:00:37 172.16.1.2 Serial0/0.100
192.168.30.1 1 FULL/- 00:00:37 172.16.2.2 Serial0/0.200
192.168.40.1 1 FULL/- 00:00:37 172.16.3.2 Serial0/0.300

R_Matriz#show ip nat translations
Pro Inside global Inside local Outside local Outside global
icmp 201.0.0.2:3 192.168.40.3:3 200.213.1.2:3 200.213.1.2:3
tcp 201.0.0.2:1025 192.168.20.3:1025 200.213.1.1:23 200.213.1.1:23

R_Matriz#show ip nat statistics
Total translations: 1 (0 static, 1 dynamic, 1 extended)
Outside Interfaces: Serial0/1
Inside Interfaces: Serial0/0.100 , Serial0/0.200 , Serial0/0.300
Hits: 8 Misses: 4
Expired translations: 3
Dynamic mappings:

R_Matriz#show ip access-lists
Standard IP access list 1
permit 172.16.1.0 0.0.0.3
permit 172.16.2.0 0.0.0.3
permit 172.16.3.0 0.0.0.3
permit 192.168.20.0 0.0.0.255 (2 match(es))
permit 192.168.30.0 0.0.0.255
permit 192.168.40.0 0.0.0.255 (6 match(es))

Abrasive,

And success to all.

References:

– Filippeti, M. – “CCNA 4.1 – Complete Study Guide, Visual Books/2008.

– Cisco NetAcademy, Academy Connection. “Cisco Study Material official.” <http://cisco.netacad.net>. Acesso em: 02/03/2008.

Video Mentor 640-802, por Wendell OdomVideo Mentor 640-802 by Wendell Odom

Wendell Odom
Wendell Odom, the Mentor

Olá Pessoal,

Foi adicionado ao HD do Blog, o curso de vídeo:

Cisco Press – CCNA Video Mentor (Exam 640-802), Second Edition

Narrado por: Wendell Odom

Estes vídeos, pelo que entendi, foram compactados com o Quicktime para reduzir o tamanho, por isso é necessário rodá-los com o próprio. No HD, está disponível uma versão light do Quicktime, na mesma pasta. Encontram-se na pasta Video Mentor no HD do Blog (link abaixo). Link para HD do Blog

Detalhe que como os vídeos são narrados em inglês é necessário um bom entendimento na língua, ou quem encontrar legendas pode fazer o upload para a pasta pública.

Abração,

Maurício.

Hello Guys,

HD was added to the Blog, the course of video:

Cisco Press – CCNA Video Mentor (Exam 640-802), Second Edition

Narrated by: Wendell Odom

These videos, which I understand have been compressed withQuicktime to reduce the size, so it is necessary to turn them with your own. In HD, is available a light version of Quicktime, in the same folder. They are in the folder on the HD Video Mentor Blog (link below).Link to HD Blog

That detail how the videos are narrated in English requires a good understanding in the language, or who find subtitles can upload to public folder.

Abrasive,

Maurício.

Livro CCNA 4.1

Olá pessoal,
Hoje chegou o meu livro CCNA 4.1 do Marco Filippetti, mantenedor do blog blog.ccna.com.br, outra referência para todos nós que queremos nos tornar Cisco Associates.

Este livro é uma das melhores referências em português existentes para a nova versão da prova. Estou levando o meu para praia, para ler nas horas vagas depois do churrasco. heheheeh

Abraços,

Maurício.