Resumo de Comandos Show no RoteadorSummary of the Router Show Commands

Olá Pessoal,

Com base no laboratório de Frame-Relay publicado anteriormente neste Post e após todo o estudo da topologia rodei os comandos abaixo, coloquei suas saídas e fiz uma tabela com uma descrição completa do que cada comando apresenta. Há um link no comando que leva diretamente para seu output.

Espero que seja de bom uso esta tabela, pois eu a utilizarei.

Um abração pessoal.

Maurício.

COMANDO RELACIONADO A RESULTADO
Show interface <interface> Hardware Apresenta status do link, endereço IP, clock rate, MTU, e protocolos da camada física e de enlace rodando (ex: LCP, NCP no PPP).
Show ip interface <interface> Configuração Apresenta dados como: status da conexão física e lógica, endereço IP, MTU, ACLs, NAT e diversos outros parâmetros.
show ip interface brief Configuração Resumo da interface: endereço IP, status do link físico e lógico,
show protocols Configuração Apresenta status do link e endereço IP, deste.
show ip protocols Protocolos de Roteamento Apresenta todas informações relevantes aos protocolos de roteamento em uso: parâmetros de configuração, rotas anunciadas, última atualização.
show ip route Tabela de Roteamento Apresenta a tabela de roteamento. Mostra a rede na qual foi aprendido (dinâmica ou estaticamente), [distância administrativa/métrica] e o IP e a interface na qual foi aprendida esta rota
show ip eigrp interfaces <AS> EIGRP Apresenta as interfaces na qual o EIGRP está rodando. Pode-se não anunciar rotas em determinadas interfaces através do comando passive-interfaces.
show ip eigrp neighbors EIGRP Apresenta os vizinhos rodando EIGRP e dados como: IP do vizinho, interface, Holdtime, Uptime, SRTT (Smooth Round Trip Time), RTO (Retransmission Time Out), Q Cnt (Queue), Seq Num.
show ip eigrp topology EIGRP Apresenta a topologia da rede. Indica: estado da rota (passive/active), (feasible distance/advertised distance).
show ip eigrp traffic EIGRP Apresenta estatísticas de pacotes EIGRP.
show frame-relay lmi Frame-Relay Apresenta estatísticas a respeito do LMI (Link Management Interface), o padrão de sinalização, entre o dispositivo local e o switch frame-relay.
show frame-relay map Frame-Relay Apresenta o mapeamento IP -> DLCI (Data Link Connection Identifier), normalmente criado através do comando frame map, ou através da tradução dinâmica pelo Inverse ARP.
show frame-relay pvc Frame-Relay Apresenta estatísticas em cada circuito frame-relay e outros dados tais como: interfaces e respectivos DLCI, tráfego, bits DE (Discard Eligibility), FECN (Forward-Explicit Congestion Notification), BECN (Backward-Explicit Congestion Notification).
show cdp CDP Apresenta informações relevantes aos timers: de envio de atualizações, holdtime e a versão anunciada do cdp.
show cdp neighbors CDP Apresenta informações referente aos vizinhos tais como: Device ID (Hostname), Local Intrf (Interface que este router está recebendo os pacotes cdp), HoldTime, Capability (Router / Switch…), Plataform (Modelo), Port ID (Porta remota).
show cdp neighbors detail CDP Apresenta as mesmas informações que o anterior, incluindo: IP do outro host e detalhes de IOS.
Show cdp entry * CDP Mesmo comando que o anterior, mudando que pode-se selecionar apenas um dispositivo pelo seu ID.

OUTPUTS:

R_Caxias#show interfaces
FastEthernet0/0 is up, line protocol is up (connected)
Hardware is Lance, address is 0001.4211.2e01 (bia 0001.4211.2e01)
Internet address is 192.168.30.1/24
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00,
Last input 00:00:08, output 00:00:05, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 124 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 input packets with dribble condition detected
789 packets output, 56808 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out

R_Caxias#show ip interface
FastEthernet0/0 is up, line protocol is up (connected)
Internet address is 192.168.30.1/24
Broadcast address is 255.255.255.255
Address determined by setup command
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is disabled
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is enabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is disabled
IP fast switching on the same interface is disabled
IP Flow switching is disabled
IP Fast switching turbo vector
IP multicast fast switching is disabled
IP multicast distributed fast switching is disabled
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Probe proxy name replies are disabled
Policy routing is disabled
Network address translation is disabled
WCCP Redirect outbound is disabled
WCCP Redirect exclude is disabled
BGP Policy Mapping is disabled

R_Caxias#show ip interface brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 192.168.30.1 YES manual up up
FastEthernet0/1 unassigned YES manual administratively down down
Serial0/0 unassigned YES manual up up
Serial0/0.201 172.16.2.2 YES manual up up
Serial0/1 unassigned YES manual administratively down down

R_Caxias#show protocols
Global values:
Internet Protocol routing is enabled
FastEthernet0/0 is up, line protocol is up
Internet address is 192.168.30.1/24
FastEthernet0/1 is administratively down, line protocol is down
Serial0/0 is up, line protocol is up
Serial0/0.201 is up, line protocol is up
Internet address is 172.16.2.2/30
Serial0/1 is administratively down, line protocol is down

R_Caxias#show ip protocols
Routing Protocol is "eigrp 10 "
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
EIGRP maximum hopcount 100
EIGRP maximum metric variance 1
Redistributing: eigrp 10
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
192.168.30.0
172.16.0.0
Routing Information Sources:
Gateway Distance Last Update
172.16.2.1 90 10
Distance: internal 90 external 170


R_Caxias#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Gateway of last resort is 172.16.2.1 to network 0.0.0.0

172.16.0.0/30 is subnetted, 3 subnets
D 172.16.1.0 [90/46738176] via 172.16.2.1, 00:29:06, Serial0/0.201
C 172.16.2.0 is directly connected, Serial0/0.201
D 172.16.3.0 [90/46738176] via 172.16.2.1, 00:29:06, Serial0/0.201
D 192.168.20.0/24 [90/46740736] via 172.16.2.1, 00:29:06, Serial0/0.201
C 192.168.30.0/24 is directly connected, FastEthernet0/0
D 192.168.40.0/24 [90/46740736] via 172.16.2.1, 00:29:06, Serial0/0.201
D*EX 0.0.0.0/0 [170/46738176] via 172.16.2.1, 00:29:06, Serial0/0.201


R_Caxias#show ip eigrp interfaces
IP-EIGRP interfaces for process 10

Xmit Queue Mean Pacing Time Multicast Pending
Interface Peers Un/Reliable SRTT Un/Reliable Flow Timer Routes
Fa0/0 0 0/0 1236 0/10 0 0
Ser 1 0/0 1236 0/10 0 0
R_Caxias#show ip eigrp interfaces ?
<1-65535> AS Number


R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11

R_Caxias#show ip eigrp topology
IP-EIGRP Topology Table for AS 10

Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - Reply status

P 192.168.30.0/24, 1 successors, FD is 28160
via Connected, FastEthernet0/0
P 172.16.2.0/30, 1 successors, FD is 46226176
via Connected, Serial0/0.201
P 172.16.1.0/30, 1 successors, FD is 46738176
via 172.16.2.1 (46738176/46226176), Serial0/0.201
P 172.16.3.0/30, 1 successors, FD is 46738176
via 172.16.2.1 (46738176/46226176), Serial0/0.201
P 0.0.0.0/0, 1 successors, FD is 46738176
via 172.16.2.1 (46738176/2169856), Serial0/0.201
P 192.168.20.0/24, 1 successors, FD is 46740736
via 172.16.2.1 (46740736/46228736), Serial0/0.201
P 192.168.40.0/24, 1 successors, FD is 46740736
via 172.16.2.1 (46740736/46228736), Serial0/0.201


R_Caxias#show ip eigrp traffic
IP-EIGRP Traffic Statistics for process 10
Hellos sent/received: 882/873
Updates sent/received: 6/4
Queries sent/received: 0/0
Replies sent/received: 0/0
Acks sent/received: 1/4
Input queue high water mark 1, 0 drops
SIA-Queries sent/received: 0/0
SIA-Replies sent/received: 0/0


R_Caxias#show frame-relay lmi
LMI Statistics for interface Serial0/0 (Frame Relay DTE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 549 Num Status msgs Rcvd 549
Num Update Status Rcvd 0 Num Status Timeouts 16

LMI Statistics for interface Serial0/0.201 (Frame Relay DTE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 0 Num Status msgs Rcvd 0
Num Update Status Rcvd 0 Num Status Timeouts 16


R_Matriz#show frame-relay map
Serial0/0.100 (up): point-to-point dlci, dlci 100, broadcast, status defined, active
Serial0/0.200 (up): point-to-point dlci, dlci 200, broadcast, status defined, active
Serial0/0.300 (up): point-to-point dlci, dlci 300, broadcast, status defined, active

R_Matriz#show frame-relay pvc
PVC Statistics for interface Serial0/0 (Frame Relay DTE)
DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.100

input pkts 14055 output pkts 32795 in bytes 1096228
out bytes 6216155 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 32795 out bcast bytes 6216155

DLCI = 200, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.200

input pkts 14055 output pkts 32795 in bytes 1096228
out bytes 6216155 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 32795 out bcast bytes 6216155

DLCI = 300, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.300

input pkts 14055 output pkts 32795 in bytes 1096228
out bytes 6216155 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 32795 out bcast bytes 6216155

R_Matriz#show frame-relay pvc ?
<16-1022> DLCI
interface show frame relay information on one interface

R_Matriz#show cdp
Global CDP information:
Sending CDP packets every 60 seconds
Sending a holdtime value of 180 seconds
Sending CDPv2 advertisements is enabled
R_Matriz#show cdp ?
entry Information for specific neighbor entry
interface CDP interface status and configuration
neighbors CDP neighbor entries

R_Matriz#show cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone
Device ID Local Intrfce Holdtme Capability Platform Port ID
R_Embratel Ser 0/1 180 R C2600 Ser 0/0

R_Matriz#show cdp neighbors detail || show cdp entry *
Device ID: R_Embratel
Entry address(es):
IP address : 201.0.0.1
Platform: cisco C2600, Capabilities: Router
Interface: Serial0/1, Port ID (outgoing port): Serial0/0
Holdtime: 180

Version :
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.2(28), RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 27-Apr-04 19:01 by miwang

advertisement version: 2
Duplex: full

Referências:

– Filippeti, M. – “CCNA 4.1 – Guia Completo de Estudo”, Visual Books/2008.

– Cisco NetAcademy, Academy Connection. “Material oficial Cisco de Estudo”. <http://cisco.netacad.net>. Acesso em: 27/02/2008.Hello Guys,

Based on the laboratory of Frame-Relay published earlier in this post and after all the study of topology tergiversation the commands below, put their exits and made a table with a full description of what each line offers. There is a link that leads directly in charge for their output.

I hope that is good use of this table, because I use.

A Abrasive staff.

Maurício.

COMMAND A RELATED RESULT
Show interface <interface> Hardware Displays the link status, IP address, clock rate, MTU, and protocols of physical layer and link running (eg LCP, NCP in PPP).
Show ip interface <interface> Configuration Presents data such as status of physical and logical connection, IP address, MTU, ACLs, NAT and various other parameters.
show ip interface brief Configuration Summary of interface: IP address, status of physical and logical link,
show protocols Configuration Displays the link status and IP address of this.
show ip protocols Routing Protocols Presents all relevant information to routing protocols in use: configuration parameters, routes announced, last update.
show ip route Routing Table Displays the routing table. Shows the network in what was learned (dynamic or static) [administrative distance / metric] and IP and the interface on which this route was learned
show ip EIGRP interfaces <AS> EIGRP Displays the interfaces in which EIGRP is running. You can not advertise routes on certain interfaces through the passive-interface command.
show ip EIGRP neighbors EIGRP Displays EIGRP neighbors running and data as the neighbor’s IP, interface, Holdtime, Uptime, SRTT (Smooth Round Trip Time), RTO (Retransmission Time Out), Q Cnt (Queue), Seq Num.
show ip EIGRP topology EIGRP Displays the network topology. States: state of the route (passive /active), (feasible distance / advertised distance).
show ip EIGRP traffic EIGRP Displays statistics for EIGRP packets.
show frame-relay LMI Frame-Relay Displays statistics on the LMI (Link Management Interface), the pattern of signaling between the local device and the frame-relayswitch.
show frame-relay map Frame-Relay Displays the IP mapping -> DLCI (Data Link Connection Identifier), usually created by using the frame map, or through dynamic translation by Inverse ARP.
show frame-relay pvc Frame-Relay Displays statistics for each frame-relay circuit and other data such as interfaces and DLCI, traffic, DE bit (Discard Eligibility), FECN (Forward-Explicit Congestion Notification), BECN (Backward-Explicit Congestion Notification).
show CDP CDP Presents relevant information to timers: the sending of updates, and holdtime of CDP version announced.
show CDP neighbors CDP Presents information regarding neighbors such as: Device ID (Hostname), Local Intrf (Interface that the router is receiving packets CDP), HoldTime, Capability (Router / Switch …), platform (Model), Port ID (remote port).
show CDP neighbors detail CDP Presents the same information as the previous one, including: IP host and the other details of IOS.
Show CDP entry * CDP Same command as before, changing that you can select only one device by its ID.

OUTPUTS:

R_Caxias#show interfaces
FastEthernet0/0 is up, line protocol is up (connected)
Hardware is Lance, address is 0001.4211.2e01 (bia 0001.4211.2e01)
Internet address is 192.168.30.1/24
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00,
Last input 00:00:08, output 00:00:05, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 124 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 input packets with dribble condition detected
789 packets output, 56808 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out

R_Caxias#show ip interface
FastEthernet0/0 is up, line protocol is up (connected)
Internet address is 192.168.30.1/24
Broadcast address is 255.255.255.255
Address determined by setup command
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is disabled
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is enabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is disabled
IP fast switching on the same interface is disabled
IP Flow switching is disabled
IP Fast switching turbo vector
IP multicast fast switching is disabled
IP multicast distributed fast switching is disabled
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Probe proxy name replies are disabled
Policy routing is disabled
Network address translation is disabled
WCCP Redirect outbound is disabled
WCCP Redirect exclude is disabled
BGP Policy Mapping is disabled
255255255255 R_Caxias#show ip interface
FastEthernet0/0 is up, line protocol is up (connected)
Internet address is 192.168.30.1/24
Broadcast address is 255.255.255.255
Address determined by setup command
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is disabled
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is enabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is disabled
IP fast switching on the same interface is disabled
IP Flow switching is disabled
IP Fast switching turbo vector
IP multicast fast switching is disabled
IP multicast distributed fast switching is disabled
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Probe proxy name replies are disabled
Policy routing is disabled
Network address translation is disabled
WCCP Redirect outbound is disabled
WCCP Redirect exclude is disabled
BGP Policy Mapping is disabled

R_Caxias#show ip interface brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 192.168.30.1 YES manual up up
FastEthernet0/1 unassigned YES manual administratively down down
Serial0/0 unassigned YES manual up up
Serial0/0.201 172.16.2.2 YES manual up up
Serial0/1 unassigned YES manual administratively down down
192.168.30.1 R_Caxias#show ip interface brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 192.168.30.1 YES manual up up
FastEthernet0/1 unassigned YES manual administratively down down
Serial0/0 unassigned YES manual up up
Serial0/0.201 172.16.2.2 YES manual up up
Serial0/1 unassigned YES manual administratively down down

R_Caxias#show protocols
Global values:
Internet Protocol routing is enabled
FastEthernet0/0 is up, line protocol is up
Internet address is 192.168.30.1/24
FastEthernet0/1 is administratively down, line protocol is down
Serial0/0 is up, line protocol is up
Serial0/0.201 is up, line protocol is up
Internet address is 172.16.2.2/30
Serial0/1 is administratively down, line protocol is down

R_Caxias#show ip protocols
Routing Protocol is "eigrp 10 "
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
EIGRP maximum hopcount 100
EIGRP maximum metric variance 1
Redistributing: eigrp 10
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
192.168.30.0
172.16.0.0
Routing Information Sources:
Gateway Distance Last Update
172.16.2.1 90 10
Distance: internal 90 external 170


R_Caxias#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Gateway of last resort is 172.16.2.1 to network 0.0.0.0

172.16.0.0/30 is subnetted, 3 subnets
D 172.16.1.0 [90/46738176] via 172.16.2.1, 00:29:06, Serial0/0.201
C 172.16.2.0 is directly connected, Serial0/0.201
D 172.16.3.0 [90/46738176] via 172.16.2.1, 00:29:06, Serial0/0.201
D 192.168.20.0/24 [90/46740736] via 172.16.2.1, 00:29:06, Serial0/0.201
C 192.168.30.0/24 is directly connected, FastEthernet0/0
D 192.168.40.0/24 [90/46740736] via 172.16.2.1, 00:29:06, Serial0/0.201
D*EX 0.0.0.0/0 [170/46738176] via 172.16.2.1, 00:29:06, Serial0/0.201


R_Caxias#show ip eigrp interfaces
IP-EIGRP interfaces for process 10

Xmit Queue Mean Pacing Time Multicast Pending
Interface Peers Un/Reliable SRTT Un/Reliable Flow Timer Routes
Fa0/0 0 0/0 1236 0/10 0 0
Ser 1 0/0 1236 0/10 0 0
R_Caxias#show ip eigrp interfaces ?
<1-65535> AS Number


R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11
172.16.3.2 R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11
01:01:00 R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11
172.16.1.2 R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11
01:01:00 R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11
172.16.2.2 R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11
01:01:00 R_Matriz#show ip eigrp neighbors
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 172.16.3.2 Ser 14 01:01:00 40 1000 0 11
1 172.16.1.2 Ser 11 01:01:00 40 1000 0 11
2 172.16.2.2 Ser 14 01:01:00 40 1000 0 11

R_Caxias#show ip eigrp topology
IP-EIGRP Topology Table for AS 10

Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - Reply status

P 192.168.30.0/24, 1 successors, FD is 28160
via Connected, FastEthernet0/0
P 172.16.2.0/30, 1 successors, FD is 46226176
via Connected, Serial0/0.201
P 172.16.1.0/30, 1 successors, FD is 46738176
via 172.16.2.1 (46738176/46226176), Serial0/0.201
P 172.16.3.0/30, 1 successors, FD is 46738176
via 172.16.2.1 (46738176/46226176), Serial0/0.201
P 0.0.0.0/0, 1 successors, FD is 46738176
via 172.16.2.1 (46738176/2169856), Serial0/0.201
P 192.168.20.0/24, 1 successors, FD is 46740736
via 172.16.2.1 (46740736/46228736), Serial0/0.201
P 192.168.40.0/24, 1 successors, FD is 46740736
via 172.16.2.1 (46740736/46228736), Serial0/0.201


R_Caxias#show ip eigrp traffic
IP-EIGRP Traffic Statistics for process 10
Hellos sent/received: 882/873
Updates sent/received: 6/4
Queries sent/received: 0/0
Replies sent/received: 0/0
Acks sent/received: 1/4
Input queue high water mark 1, 0 drops
SIA-Queries sent/received: 0/0
SIA-Replies sent/received: 0/0


R_Caxias#show frame-relay lmi
LMI Statistics for interface Serial0/0 (Frame Relay DTE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 549 Num Status msgs Rcvd 549
Num Update Status Rcvd 0 Num Status Timeouts 16

LMI Statistics for interface Serial0/0.201 (Frame Relay DTE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 0 Num Status msgs Rcvd 0
Num Update Status Rcvd 0 Num Status Timeouts 16


R_Matriz#show frame-relay map
Serial0/0.100 (up): point-to-point dlci, dlci 100, broadcast, status defined, active
Serial0/0.200 (up): point-to-point dlci, dlci 200, broadcast, status defined, active
Serial0/0.300 (up): point-to-point dlci, dlci 300, broadcast, status defined, active

R_Matriz#show frame-relay pvc
PVC Statistics for interface Serial0/0 (Frame Relay DTE)
DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.100

input pkts 14055 output pkts 32795 in bytes 1096228
out bytes 6216155 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 32795 out bcast bytes 6216155

DLCI = 200, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.200

input pkts 14055 output pkts 32795 in bytes 1096228
out bytes 6216155 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 32795 out bcast bytes 6216155

DLCI = 300, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0.300

input pkts 14055 output pkts 32795 in bytes 1096228
out bytes 6216155 dropped pkts 0 in FECN pkts 0
in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 32795 out bcast bytes 6216155

R_Matriz#show frame-relay pvc ?
<16-1022> DLCI
interface show frame relay information on one interface

R_Matriz#show cdp
Global CDP information:
Sending CDP packets every 60 seconds
Sending a holdtime value of 180 seconds
Sending CDPv2 advertisements is enabled
R_Matriz#show cdp ?
entry Information for specific neighbor entry
interface CDP interface status and configuration
neighbors CDP neighbor entries

R_Matriz#show cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone
Device ID Local Intrfce Holdtme Capability Platform Port ID
R_Embratel Ser 0/1 180 R C2600 Ser 0/0

R_Matriz#show cdp neighbors detail || show cdp entry *
Device ID: R_Embratel
Entry address(es):
IP address : 201.0.0.1
Platform: cisco C2600, Capabilities: Router
Interface: Serial0/1, Port ID (outgoing port): Serial0/0
Holdtime: 180

Version :
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IM), Version 12.2(28), RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 27-Apr-04 19:01 by miwang

advertisement version: 2
Duplex: full

References:

– Filippeti, M. – “CCNA 4.1 – Complete Study Guide, Visual Books/2008.

– Cisco NetAcademy, Academy Connection. “Cisco Study Material official.” <http://cisco.netacad.net>. Acesso em: 27/02/2008.

(Visitado 1.852 times, 1 visitas hoje)

Autor: Maurício Bento Ghem

Administrador do blog de estudos www.bentow.com.br Para maiores informações, www.bentow.com.br/sobre

Deixe uma resposta

O seu endereço de e-mail não será publicado. Campos obrigatórios são marcados com *